LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- PANAMERA (970) >> WM 194519 Removing And Installing Additional Coolant Pump (PANAMERA S E-Hybrid, PANAMERA S Hybrid) >> Installing Coolant Pump For High-Temperature System

Installing Coolant Pump For High-Temperature System

Information 

For tightening torques, tightening sequence and assembly overview, see → 1001IN TIGHTENING TORQUES, TIGHTENING SEQUENCES, ASSEMBLY OVERVIEWS

  1. Installation is performed in reverse order. Pay particular attention to the following:

    → Tightening torque: 40 Nm (30 ftlb.) 

    Fill in coolant for high-temperature system. → Filling Coolant 

scientia non olet · About LEMON Manuals