Installing Rear Lid Seal

Place seal in installation position.
1. 1.1. Make sure that the gap -1- in the seal is centered at the top.
2. 1.2. Make sure that the vent holes -2- in the seal are on the outside.
  
  Fig 1: Identifying Rear Lid Seal Installation Position
  Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press rear lid seal onto the sheetmetal flange.

Fig 2: Pressing Rear Lid Seal Onto Sheetmetal Flange
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Use pliers 9513
to press the seal on at the rounded areas.

Fig 3: Pressing On Seal At Rounded Areas
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check that the seal is fitted securely and is flush.
Install rear shelf. → INSTALLING SUN BLIND FOR REAR WINDOW