Installing Wiring For Electrically Adjustable Seat

Information 

The number of plug connections can vary, depending on equipment.

Information 

• When routing the wire harness, make sure that it is routed without tension. 

1. Plug in and lock electric plug connections -1-  .
   Fig 1: Identifying Seat Wire Harness Plug Connections

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Fit all relevant tie-wraps -1-  and clips -2-  .
   Fig 2: Identifying Seat Wire Harness Fastening Points

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Plug the single connectors -2-  into the connector socket -1-  and check that the lock engages securely.
   Fig 3: Fitting Single Connectors

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Fit tie-wrap -3-  on the connector socket.
5. Fit cable sheathing -1-  .
   Fig 4: Fitting Cable Sheathing

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Route wire harness -2-  in the cable conduit and fit the split cable conduit -1-  .
   Fig 5: Routing Wire Harness In Cable Conduit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
7. Clip cable conduit -1-  into the brackets -2 + 3-  .
   Fig 6: Clipping Cable Conduit Into Brackets

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
8. Clip in bracket -2-  and screw in fastening screw -1-  .
   Fig 7: Installing Bracket

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
9. Clip in bracket at the seat frame -1-  .
   Fig 8: Clipping Wire Harness Bracket

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.