Installing Control Unit For Reversing Camera

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 

1. Plug in electric plug connections -4-  until they engage securely.
2. Plug in electric plug connection -3-  (-A-  ) and close the locking mechanism -B-  until it locks securely.
Fig 1: Securing Electric Plug Connections
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Insert control unit for reversing camera -1-  into the holder -2-  (-C-  ) and close the lever on the holder.
   Fig 2: Installing Control Unit For Reversing Camera

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.