Removing Control Unit For Distance Measuring Sensor

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of control unit for distance measuring sensor

1. Switch off ignition and remove the remote control from the ignition lock.
2. Remove cover on sensor.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Removing cover on sensor

   Release cover at the top.

   Fold cover forwards and detach at the bottom holder.

   Unclip and remove upper cover.

3. Release electric plug connection -a-  and disconnect connector from control unit for distance measuring sensor.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Disconnecting plug connection

4. Unscrew and remove fastening screws -1  from holder for control unit for distance measuring sensor.

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Unscrewing fastening screws

5. Remove holder together with control unit for distance measuring sensor.