Battery Handling Instructions
WARNING: This page is about a different variant/trim than selected.
Information
- The tightening torque for the battery terminals is > Torque 6 Nm (4.5 ftlb.) +/- 0.5 Nm (0.5 ftlb.)
- If the battery is reconnected, proceed according to
Information
- Battery terminals do not need to be greased.
- The battery terminal clamps should only be attached by hand - without excessive force - to prevent damage to the battery.
- The tightening torque for the battery terminals is > Torque 5 Nm (3.5 ftlb.).
- If the battery is reconnected, proceed according to