LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (27 - Starter, Power Supply, Cruise Control 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 270519 Removing And Installing Battery Sensor >> Installing Battery Sensor

Installing Battery Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Connect ground line to the ground point and secure with the fastening nut -2-  . > Tightening torque 9.7 (7.5 ftlb.)  .
    G15198881Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Fitting ground strap

  2. Fit and secure battery sensor -1-  with terminal clamp on the battery. > Tightening torque 6 Nm (4.5 ftlb.) 
    G15198882Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Attaching terminal clamps

  3. Connect electric plug connection for battery sensor.
scientia non olet · About LEMON Manuals