LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (19 - Engine - Cooling 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 195519 Removing And Installing Housing For Coolant Regulator >> Technical Values >> Coolant Regulator Housing

Coolant Regulator Housing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Coolant Regulator Housing Components Location With Torque Specification
G15198485Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Coolant regulator housing

1  Coolant regulator housing
2  Screw, M6 x 25 > Tightening torque 12 Nm (9 ftlb.) 
3  Seal/replace 
4  Coolant regulator
scientia non olet · About LEMON Manuals