LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (19 - Engine - Cooling 4.8L Turbo -- 970 - PANAMERA (970)) >> WM, 193817 Draining And Filling Coolant (Includes Bleeding) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install engine underbody panelling.

    > WM 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY (PANAMERA, PANAMERA S, PANAMERA S EXECUTIVE, PANAMERA 4, PANAMERA 4S, PANAMERA 4 S EXECUTIVE, PANAMERA TURBO S)

  2. Close the clip on the bleeder valve.
  3. Fit left plenum panel cover.

    > WM 852219 REMOVING AND INSTALLING PLENUM PANEL COVER (EXCEPT PANAMERA S EXECUTIVE, PANAMERA EXECUTIVE, PANAMERA 4 S EXECUTIVE, PANAMERA TURBO EXECUTIVE, PANAMERA GTS, PANAMERA 4S SPORT EDITION, PANAMERA 4 EXECUTIVE)

  4. Fit lid on the coolant reservoir.
  5. Conduct a test drive with the vehicle, check the fluid level in the reservoir after the cooling system has cooled again and, if necessary, fill up to the MAX marking with coolant.
  6. Check the cooling system if necessary.
scientia non olet · About LEMON Manuals