Installing Molding

Information 

Replacing molding:

• Install new window guide  . → INSTALLING WINDOW GUIDE

1. Check condition of window guide and replace it if necessary. → 644555 REPLACING WINDOW GUIDE
2. Pull window guide into the B-pillar.
   Fig 1: Pulling In Window Guide

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Position molding on the door sub-frame.
   Fig 2: Positioning Molding

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Check that the rubber seal is fitted correctly into the B-pillar cover.
5. Set the molding with blind rivets -1-  and rivet using a hand riveting tool Nr.124-1 Pos.1  .
   Fig 3: Locating Riveting Molding Screws

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.