Underbody Protection

Information 

• In the case of repair work, the standard chipping protection/undersealing of the body structure must be restored according to the following illustrations after painting and prior to unit assembly. 
• The undersealing can only be applied to primed sheetmetal. 
  Fig 1: Identifying Underbody Protection

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Identifying Underbody Protection For Front Side Member

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Apply underbody protection to the marked area.

   Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
   Front side member		Application depth	0.3 mm
   Courtesy of PORSCHE CARS NORTH AMERICA, INC. Underbody protection

   Fig 3: Identifying Underbody Protection For Rear Spring Strut Mount

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Apply underbody protection to the marked area. Thickness: 0.3 mm.

   Location	Description	Type	Basic value	Tolerance 1	Tolerance 2
   Rear spring strut mount		Application depth	0.3 mm
   Courtesy of PORSCHE CARS NORTH AMERICA, INC. Underbody protection