Removing Control Unit For Rear Lid

→ Remove the ignition key and switch off load before disconnecting or removing load.

Fig 1: Identifying Control Unit For Rear Lid Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Release electric connectors -1, 2, 3-  (-a-  ) and unplug them at the lid control unit.
   Fig 2: Disconnecting Connectors

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Press the two locking lugs -arrow-  on the control unit and unhook the control unit from the lid.
   Fig 3: Removing Control Unit

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.