LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Panamera 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 55 - Lids, Flaps -- PANAMERA (970) >> WM 551019 Removing And Installing Release For Front Lid (Except PANAMERA S Executive, PANAMERA Executive, PANAMERA 4 S Executive, PANAMERA Turbo Executive, PANAMERA Turbo S, PANAMERA Turbo S Executive, PANAMERA 4S Sport Edition, PANAMERA 4 Executive) >> Removing Release For Front Lid

Removing Release For Front Lid

Fig 1: Identifying Front Lid Position
G09810093Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip cable for front lid -1-  at the lower part of the front lid lock.
    1. 1.1. Release locking lug -2-  on cable for front lid -A-  .
    2. 1.2. Unclip cable for lower part of lid lock -1-  (-B-  ).
    3. Fig 2: Disconnecting Cable At Lower Part Of Lid Lock
      G09810094Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Disconnect cable for front lid at the release mechanism.
    1. 2.1. Unclip guide tube at the release mechanism and swivel the cable out -A-  .
    2. 2.2. Remove the cable from the mounting -B-  .
    Fig 3: Disconnecting Cable Of Front Lid
    G09810095Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unscrew fastening screws -2-  .
    Fig 4: Removing Cable Mounting Screws
    G09810096Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Swivel release mechanism down and out.
    Fig 5: Removing Swivel Mechanism
    G09810097Courtesy of PORSCHE CARS NORTH AMERICA, INC.