Installing Wire Harness From Power Distributor (HSB) To B+ Connection Point In Engine Compartment

Bring B+ line from the wheel housing into the engine compartment, position it and clip it on.

Fig 1: Installing Wire Harness From Power Distributor (HSB) To B+ Connection Point In Engine Compartment
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press B+ line into the bracket for the B+ connection point in the engine compartment -arrow B- until the catch -arrow A- locks with an audible click.

Fig 2: Engaging B+ Line In B+ Bracket
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Screw in fastening screw for B+ connection point in the engine compartment -1- .

Fig 3: Screwing B+ Connection Point In Engine Compartment
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Screw in connections at the B+ connection point in the engine compartment.
1. 3.1. Clip in printed circuit board (PCB) -4- until it engages securely -arrow B- .
2. 3.2. Fit connection for fan blower -3- .
3. 3.3. Fit connection for generator/starter -2- .
4. 3.4. Screw on nuts -arrow A- .
Clip in B+ line close to the left wheel housing.

Fig 5: Clipping B+ Line At Wheel Housing
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clip in B+ line in the underbody area.

Fig 6: Clipping B+ Line On Underbody
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clip in B+ line close to the fuel tank.

Fig 7: Clipping B+ Line Near Fuel Tank
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull B+ line from under the vehicle into the luggage compartment -arrow- and position rubber sleeve -1- .

Fig 8: Pulling B+ Line Into Luggage Compartment
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull B+ line through under the transverse cover.
Unclip transverse cover -2- and lift it up -arrow A- .

Pull B+ line -1- through under the transverse cover -arrow B- .

Fig 9: Pulling B+ Line Under Transverse Strut
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Clip in B+ line in the luggage compartment area.
Screw B+ line into the power distributor (HSB). → Installing Power Distributor (HSB)