Removing Sub-Part For Rear Light

Information 

• Some of the repair illustrations show only one side of the vehicle. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 
• These must be carried out as a mirror image of the steps shown for the front and rear. 
  Fig 1: Identifying Rear Light Sub-Part Installation Position

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Cut off wire harness in area -x-  .
   Fig 2: Identifying Rear Light Sub-Part And Connection Part

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Remove grommet -A-  and then remove sub-part.
   Fig 3: Removing Rear Light Sub-Part

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.