Removing Transmitter (Trigger) For TPM

Fig 1: Identifying TPM Antenna Installation Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Remove the ignition key and switch off load before disconnecting or removing load.

1. Release -arrow A-  and pull off -arrow B-  connector.
   Fig 2: Pulling Out Connector

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Remove transmitter (trigger) for tire pressure monitoring system (TPM).
   1. 2.1. Release the holder -1-  using a screwdriver -arrow A-  .
   2. 2.2. Remove transmitter (trigger) for TPM from the holder -arrow B-  .
      Fig 3: Removing Transmitter (Trigger) For TPM

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.