LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (37 - Automatic Transmission - Actuation, Ass. Housing -- 987-BOXSTER-CAYMAN) >> WM 375519 Removing And Installing ATF Pan (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Installing ATF Pan

Installing ATF Pan

WARNING: This page is about a different variant/trim than selected.
  1. Clean sealing surfaces of ATF pan and transmission.
  2. Clean magnet -4-  and place it in the bead of the ATF pan. Ensure contact over full area.
  3. Fit ATF pan -2-  with new seal -3-  and screw in screws -1-  .
    4. Fig 1: Identifying ATF Pan And Screws
    G09587137Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Tighten screws to specified tightening torque → Tightening sequence:  . → Tightening torque: 8 ftlb.  .
    Fig 2: Identifying ATF Pan Screws Tightening Sequence
    G09587138Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals