LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (37 - Automatic Transmission - Actuation, Ass. Housing -- 987-BOXSTER-CAYMAN) >> WM 373119 Removing And Installing Multi-Functional Switch (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove engine-compartment lid. → 557819 REMOVING AND INSTALLING ENGINE COMPARTMENT LID
  2. Fix the engine in the installation position using safety device 10-222 A  at the engine lifting bracket.
    Fig 1: Fixing Engine Installation Position Using Safety Device (10-222 A)
    G09586881Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Raise the vehicle at the prescribed jacking points. → Lifting The Vehicle
  4. Remove support plate. → Removing Support Plate
scientia non olet · About LEMON Manuals