Technical Values
WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw, fold placer to main folding top bow | Tightening torque | 1.8 Nm (1.5 ftlb.) | |||
| Fastening screw, hood covering to sides of roof frame | Tightening torque | 3.5 Nm (2.5 ftlb.) | |||
| fastening screws, retaining strip to side of roof frame | Tightening torque | 2.8 Nm (2.0 ftlb.) | |||
| Fastening screw securing seal for hood tip to roof frame | Tightening torque | 3.5 Nm (2.5 ftlb.) | |||
| Fastening screw, cover strip to roof frame | Tightening torque | 3.5 Nm (2.5 ftlb.) | |||
| Fastening screw securing clamping rail to main folding top bow | Tightening torque | 5 Nm (3.5 ftlb.) | |||
| Fastening screw securing clamping rail to main folding top bow | Tightening torque | 5 Nm (3.5 ftlb.) | |||
| Fastening screw securing clamping rail to main folding top bow | Tightening torque | 5 Nm (3.5 ftlb.) | |||
| Fastening screw securing fitting aid to corner bow | Tightening torque | 2.8 Nm (2 ftlb.) | |||
| Fastening screw securing tightening strip to main folding top bow | Tightening torque | 1.8 Nm (1.5 ftlb.) |