Loosening Hood Covering At The Tension Bow

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Hood Covering

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew hood covering end piece -1- from rear of tension bow -2- .

Fig 2: Loosening Hood Covering End Piece From Rear Of Tension Bow
Courtesy of PORSCHE CARS NORTH AMERICA, INC.