LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 612855 Replacing Hood Covering (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER SPYDER, CAYMAN R) >> Installing Hood Covering >> Fastening The Slide

Fastening The Slide

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Hood Covering
G09590370Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Pull cord -3-  from below through the loop on the hood covering -arrow B-  . Engage cord with knot on slide -2- (-arrow A-). 

    Information 

    Make sure that the cord is routed above the pin of the main folding top bow.

  2. Position slide -2-  over leaf spring -arrow C-  and clip onto the main folding top bow. Drive in expanding pin of expansion rivet -1- (-arrow D-). 
    3. Fig 2: Pulling Cord From Hood Covering
    G09590371Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals