LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 611319 Removing And Installing Front Roof Frame (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER SPYDER, CAYMAN R) >> Installing Front Roof Frame

Installing Front Roof Frame

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position roof frame -2-  on the hood covering -3-  and align it.
  2. Press in cover piping -1-  on the roof frame -2- (-arrow-)  .

    A self-adhesive strip is affixed to the front of the hood covering.

    Fig 1: Locating Roof Frame And Hood Covering
    G09590275Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    There must be no bubbles, especially in the area of the lap seam. If necessary, re-tighten convertible top covering with pliers.

  3. Fold the hood covering -1-  around the roof frame -2-  and into the groove without wrinkles -arrows A-  .
  4. Stick on hood covering -1-  at the sides of the roof frame -2- (-arrows B-). 
    5. Fig 2: Fastening Hood Covering
    G09590276Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Secure the hood covering at the front with clamps.
    Fig 3: Fastening Front Hood Covering
    G09590277Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals