LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman S, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 610119 Removing And Installing Hood (Except CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, BOXSTER SPYDER, CAYMAN R) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Hood frame not removed/installed correctly
  • Risk of damage to paintwork on roll-over bar

→ Only install the hood in the vehicle together with the roll-over bar.

→ A second person is required during removal/installation.

  1. Install roll-over bar. → INSTALLING ROLL-OVER BAR
scientia non olet · About LEMON Manuals