Installing Cover For Front Backrest

Fig 1: Identifying Installation Position Of Cover For Front Backrest

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Check clamps -1- , and replace if necessary.

Fig 2: Checking Clamps
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull on cover for backrest -1- and align with contour of padding.

Fig 3: Installing Cover For Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Check fastening clip -3- , and replace if necessary.
Press plastic strip -2- on cover for backrest -1- into the fixing clips -3- .

Fig 4: Fastening Cover For Backrest

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fold cover piping -1- at the sides in direction of arrow .

Fig 5: Folding Cover For Backrest At Sides
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press connection of backrest cover -1- at the rear into the cushion carrier -2- -Arrows A- and tap gently into place (plastic hammer).

Fig 6: Fastening Cover At Rear Of Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage connection of backrest cover -1- at the bottom into the cushion carrier -Arrows B- .
Press connection of backrest cover -1- into the side airbag frame -2- with a plastic wedge -3- .

Fig 7: Fastening Connection At Frame For Side Airbag
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install side airbag. → INSTALLING SIDE AIRBAG
Engage cover piping -1- right and left into backrest frame -2- .

Fig 8: Fastening Cover Piping
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press cover for backrest -1- into the cushion carrier -2- lower left and right using a plastic wedge -3- .

Fig 9: Fastening Cover For Backrest At Bottom
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position collar -2- on the backrest cover -1- and press in until it clicks into place.

Fig 10: Positioning Collar On Backrest Cover
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position coat hook -1- and screw down with the fastening screw -2- .

Fig 11: Installing Coat Hook
Courtesy of PORSCHE CARS NORTH AMERICA, INC.