LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman S, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> 74 - Seat UPHOLSTERIES, Cover -- 987-BOXSTER-CAYMAN >> WM 741319 Removing And Installing Cover For Front Seat (All Models) >> Subsequent Work >> Removing Creases In Seat Cover (Leather)

Removing Creases In Seat Cover (Leather)

NOTE: Risk of damage to cover if excessive heat is applied.
  • Creases in cover

→ If creases have formed, only short partial warming with the hot-air gun is permissible.

→ The hot-air temperature of 50 °C must always be observed.

  1. If creases have formed, partially heat the affected areas of the cover with the hot-air gun and smooth out the cover using the special tool.

    Wetting-off iron 9747 

    Knurling iron 9747/1 

    Bone burnisher 9747/2 

    Hot-air gun v.a.g 1416 

scientia non olet · About LEMON Manuals