Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Drive plate to crankshaft flange | M10 x 1 x 25 (12.9) | Initial tightening | 25 Nm (19 ftlb.) | ||
| Drive plate to crankshaft flange | M10 x 1 x 25 (12.9) | Torque angle | 120° | ||
| Flywheel to crankshaft flange | M10 x 1 x 50 (12.9) | Initial tightening | 25 Nm (19 ftlb.) | ||
| Flywheel to crankshaft flange | M10 x 1 x 50 (12.9) | Torque angle | 120° | ||
| Clutch pressure plate to flywheel | Replace M8 screws and tighten crosswise in several stages | Tightening torque | 23 Nm (17 ftlb.) |