Installing Three-Phase Generator
- Insert generator -1-
, connect B+ lead -4-
and tighten with fastening nut -3-
. → Tightening torque: 15 Nm (11 ftlb.)
- Connect plug -2-
until it clicks into place.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Run in generator -1-
carefully to the rear -arrow A-.
- Turn generator -1-
in an anticlockwise direction -arrow B-
until the holding arm fits into its installation position behind the lug.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Insert and position fastening screw -3-
and deflection roller -4-
in generator -1-
.
- Insert generator -1-
and fastening screw -3-
from above into the slotted support and tighten fastening screw -3-
. → Tightening torque: 46 Nm (34 ftlb.)
- Tighten fastening screw -2-
. → Tightening torque: 46 Nm (34 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.