LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman R, Standard Trans >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 46 - Brakes - Brake Mechanics -- 987-BOXSTER-CAYMAN >> WM 460519 Removing And Installing Brake Pedal (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S Black Edition, CAYMAN R) >> Installing Brake Pedal

Installing Brake Pedal

  1. 1  - Brake light switch
  2. 2  - Pedal axle
  3. 4  - Threaded bushing
  4. 5  - Bolt (replace after loosening)
  5. 6  - Brake pushrod
  6. 7  - Brake pedal
  7. 8  - Bearing sleeves
    8. Fig 1: Exploded View Of Brake Pedal Assembly
    G09587782Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Grease bracket for brake pedal.

    Grease bracket close to the pedal bearing axle -Arrows-  with Renocal (Glissando VW 745). Part No. 000.043.206.21 (10g tube).

  2. Insert brake pedal.

    Turn the brake pedal -7-  and brake pushrod -6-  as required.

  3. Fit brake pushrod on brake pedal. Use a new bolt, see -Inset-  (replace bolt after loosening).

    Tighten new bolt, see -Inset-  .

    → Tightening torque: +10 Nm (+7.5 ftlb.)

  4. Install pedal axle.

    Tighten pedal axle -2-  .

    → Tightening torque: +10 Nm (+7.5 ftlb.) -  2 Nm (-  1.5 ftlb.)

    Fig 2: Identifying Pedal Axle
    G09587783Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals