Installing Roll-Over Bar
- Fit roll-over bar into the vehicle -arrows-
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw in fastening nuts at the rear left and right -1-
(-arrows-
). → Tightening torque: 23 Nm (17 ftlb.) +/-2 Nm (+/-1.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Screw in fastening nuts at the front left and right -1-
(-arrows-
). → Tightening torque: 23 Nm (17 ftlb.) +/-2 Nm (+/-1.5 ftlb.)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Connect electric plug connection -1-
(-arrows-
).
Courtesy of PORSCHE CARS NORTH AMERICA, INC.