LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman R, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 343519 Removing And Installing Transmission (CAYMAN, BOXSTER, BOXSTER LIM. Ed. "Orange", BOXSTER "Sport Edition") >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Retaining device 9624/3  must be removed from the cross member.
    Fig 1: Identifying Retaining Device
    G09586587Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit restraining cables to cross member.
    Location Description Type Basic value Tolerance 1 Tolerance 2
    Restraining cable Fastening nut between restraining cable and cross member Tightening torque 23 Nm (17 ftlb.)    
  3. Install support plate.

    → INSTALLING SUPPORT PLATE

  4. Install rear silencer.

    → INSTALLATION

  5. Adjust the shift and selector cables. → Installing Shift And Selector Cables 341219 REMOVING AND INSTALLING SHIFT AND SELECTOR CABLES 
  6. Mount wheels.

    → INSTALLING FRONT WHEEL HOUSING LINER

  7. Check and if necessary top up transmission oil.

    → 340135 CHECKING AND TOPPING UP TRANSMISSION OIL 

  8. Lower the vehicle.
scientia non olet · About LEMON Manuals