LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman R, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 612855 Replacing Convertible-Top Covering (BOXSTER SPYDER) >> Disassembling Convertible-Top Covering >> Removing Upper/Lower Part Of Tenax Fastener

Removing Upper/Lower Part Of Tenax Fastener

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper part of Tenax fastener.
    1. 1.1. Insert a commercially available Seeger circlip ring pliers into the twist lock -1- (-arrow A-)  .
    2. 1.2. Hold upper part of Tenax fastener -2-  securely and loosen the twist lock -1- (-arrow B-). 
    3. 1.3. Remove upper part of Tenax fastener -2-  and twist lock -1-  from the weather protector -3-  .
    Fig 1: Removing Upper Part Of Tenax Fastener
    G09590230Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove lower part of Tenax fastener.
    1. 2.1. Insert two commercially available Seeger circlip ring pliers into the twist lock and lower part of Tenax fastener -arrow A-  .
    2. 2.2. Counter lower part of Tenax fastener and loosen the twist lock -arrow B-  .
    3. 2.3. Remove lower part of Tenax fastener and twist lock from the hood covering.
    Fig 2: Removing Lower Part Of Tenax Fastener
    G09590231Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals