LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman R, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 612855 Replacing Convertible-Top Covering (BOXSTER SPYDER) >> Disassembling Convertible-Top Covering >> Removing Tensioning Element

Removing Tensioning Element

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fold over hood covering -1- (-arrow-)  and open the Velcro fastener -2-  on the fabric cover -3-  .
    Fig 1: Disassembling Convertible-Top Covering
    G09590228Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -1-  on the tensioning element -2-  and remove it -arrow A-  .
  3. Take off hood covering -3- (-arrow B-). 
  4. Fold over fabric cover -4- (-arrow C-)  and remove the spiral spring -5-  with the spring plate -6- (-arrow D-)  .
    5. Fig 2: Removing Tensioning Element
    G09590229Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals