LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman R, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (61 - Convertible Top, Hardtop -- 987-BOXSTER) >> WM 611019 Removing And Installing Front Convertible-Top Mount (BOXSTER, BOXSTER S, BOXSTER LIM. Ed. "Orange", BOXSTER S LIM. Ed. "Orange", BOXSTER S "RS 60 SPYDER", BOXSTER "Sport Edition", BOXSTER S "Sport Edition", BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition) >> Subsequent Work

Subsequent Work

WARNING: This page is about a different car, the 2012 Porsche Boxster, 2011 Porsche Boxster, 2010 Porsche Boxster, 2009 Porsche Boxster, and 2008 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. End service position. → Ending Convertible Top Service Position 6101IN CONVERTIBLE-TOP SERVICE POSITION 
  2. Check gap dimensions for convertible top, adjust if necessary. → WM 5X00IN DIAGRAM - BODY GAP DIMENSIONS (ALL MODELS)

    Information 

    Only for vehicles with hardtop.

  3. Install hardtop. → Installing Hardtop 

    Information 

    Only for vehicles with hardtop.

  4. Adjust hardtop. → 610215 ADJUSTING HARDTOP 


Information 

Only for removing/installing or replacing convertible-top peg mount.

Install sun visor. → 682319 REMOVING AND INSTALLING SUN VISOR

scientia non olet · About LEMON Manuals