| Drive shaft to transmission M10 (manual transmission) |
Please note: Do not grease threaded connections in Dacromet finish - aluminum color. |
Tightening torque |
81 Nm (60 ftlb.) |
|
|
| Drive shaft to transmission, M10 (PDK) |
Please note: Do not grease threaded connections in Dacromet finish - aluminum color. |
Tightening torque |
81 Nm (60 ftlb.) |
|
|
| Drive shaft to wheel hub, M22 x 1.5 |
Please note: Do not grease threaded connections in Dacromet finish - aluminum color. Replace lock nut following removal. |
Tightening torque |
460 Nm (340 ftlb.) |
|
|