LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayman Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers -- 987-BOXSTER-CAYMAN >> WM 635019 Removing And Installing Rear Bumper (All Models) >> Installing Rear Bumper >> Notes

Installing Rear Bumper: Notes

Fig 1: Identifying Rear Bumper Installation Position
G09590623Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position lower centre heat shield -3-  together with rear support -7-  and tighten with fastening screws -6-  .
  2. Screw in fastening screw -4-  with washer -5-  .
  3. Position rear bumper -2-  or (USA/Canada version) -2A-  with mounted lower centre heat shield -3-  .
  4. Tighten fastening screws -1-  . → Tightening torque: 85 Nm (63 ftlb.) 
  5. Check the functional dimensions of the rear bumper and the correct assembly of the heat shield and correct if necessary. → Additional Assembly Instructions For Installation Of The Bumper 
    6. Fig 2: Identifying Rear Bumper Components
    G09590624Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals