Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Measuring point on front retaining strip | Adjustment dimension | 316 mm | |||
| Lower edge of front lid to upper edge of front retaining strip | Adjustment dimension | 26 mm | +/-1 mm | ||
| Lower edge of front retaining strip to body | Adjustment dimension | 91 mm | +/-0.5 mm | ||
| Outer edge of front retaining strip to front edge of wing | Adjustment dimension | 130 mm | +/-0.5 mm | ||
| Fastening nuts securing front retaining strip to body | Tightening torque | 10 Nm (7.5 ftlb.) |