Installing Multi-Functional Switch

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position of multi-functional switch

1. Fit multi-functional switch on the shifting shaft.
2. Adjust multi-functional switch.

   >373115 ADJUSTING MULTI-FUNCTIONAL SWITCH 

3. Connect electric plug connection to the multi-functional switch until it engages securely.
4. Position heat shield on the transmission.
5. Tighten fastening screws -Arrows-  .

   > Tightening torque 10 (7.5 ftlb.) Nm --

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Heat shield

6. Function test on gear selecting system:
   • Will the vehicle start?
   • Do all selector-lever positions work?