Installing Transmission Control Unit

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Always wear approved work clothes and shoes when carrying out assembly work. 
• Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation. 
• Do not touch electric pins and plug contacts. 

1. Clip transmission control unit -3-  into the holder until it engages securely.
2. Push transmission control unit -3-  into the guides -4-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Pushing in transmission control unit

3. Tighten fastening screw -2-  . > Tightening torque 8 (6 ftlb.) Nm  --

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Plugging in connector on transmission control unit

4. Plug in electric plug connection -1-  and lock it -a-  .
5. Position the carpet.