Adjusting Rear Axle Toe
- Unexpected vehicle handling
- Steering-angle sensor does not function
- Malfunction in steering-angle sensor
→ After working on wheel suspension parts, when replacing the steering-angle sensor, and after changing the wheel alignment values, calibrate the steering-angle sensor using the Porsche System Tester.
> 456005 INITIALISING AND CALIBRATING STEERING-ANGLE SENSOR
→ Keep the front wheels in straight-ahead position on the measuring platform during calibration.
→ Check the actual value of the steering-angle sensor after suspension alignment where no changes were made to the wheel alignment values.
Always observe specified tightening torque for lock nut on toe eccentric adjuster -B- ! > Tightening torque 170 Nm (125.4 ftlb.)
The toe is adjusted at the toe eccentric adjuster -B- !
Toe eccentric adjuster B
After loosening the lock nut, turn toe eccentric adjuster -B- as required.
Toe eccentric adjuster B