Removing Steering Wheel
- Turn wheels to straight-ahead position.
Information
- Always release and disconnect the plug connections for the steering wheel heating and airbag cables before removing the steering wheel.
- Release and disconnect plug connection for airbag wire harness -1-
- If the vehicle has a heated steering wheel: Release and disconnect plug connection for steering wheel heating -2-
.
Disconnecting plug connections
Information
Immediately after unscrewing the screw and before removing the steering wheel, always mark the position of the steering wheel between the steering wheel and steering column -Arrow- .
This ensures that the steering wheel will be fitted at the same position on the steering column again during re-installation.
Position marking on steering wheel with respect to steering column
- Unscrew screw -1-
using > Nr.32 - multiple-tooth socket-wrench insert
Multiple-tooth screw
- Mark the position of the steering wheel.
- Remove steering wheel.