Technical Values
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Threaded connection securing tie rod to pivot bearing | Item 2: M14 x 1.5 thread (always use new screws and lock nuts following removal) | Tightening torque | 90 (67 ftlb.) Nm | ||
| Threaded connection securing tie rod to tie-rod ball | Item 3: M16 x 1.5 thread, lock nut | Tightening torque | 90 (67 ftlb.) Nm |