LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> Steering >> Manual Steering >> 48 - Steering (4.8L Turbo) -- 92A - Cayenne (92A) >> WM, 483019 Removing And Installing Control Unit For Height Adjustment >> Installing Control Unit For Height Adjustment

Installing Control Unit For Height Adjustment

  1. Place height adjustment control unit in steering column.
  2. Secure height adjustment control unit using the fastening screw.

    > Tightening torque 3.6 (2.6 ftlb.) Nm

    G16329112Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Installing control unit

  3. Plug in electric connector at the control unit until it engages securely.
scientia non olet · About LEMON Manuals