Subsequent Work For Removing And Installing Steering Column

If installed: 

1. Remove knee airbag.

   > WM 697819 REMOVING AND INSTALLING KNEE AIRBAG ON DRIVER'S SIDE

2. Install trim panel under dashboard on driver's side.

   > WM 701919 REMOVING AND INSTALLING TRIM PANEL UNDER DASHBOARD (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S E-HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

3. Install steering-column switch.

   > WM 945019 REMOVING AND INSTALLING STEERING-COLUMN SWITCH (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))

   Turbo: 

4. Install primary catalytic converter.

   > 267619 REMOVING AND INSTALLING PRIMARY CATALYTIC CONVERTER

   Diesel: 

5. Secure rear part of front left wheel cover.

   > > WM 661919 REMOVING AND INSTALLING FRONT WHEEL COVER (CAYENNE, CAYENNE GTS, CAYENNE TURBO S, CAYENNE S, CAYENNE S HYBRID, CAYENNE TURBO, CAYENNE S DIESEL, CAYENNE (3.0))