LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 49 (46 - Brakes - Brake Mechanism (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 468356 Replacing Brake Shoes >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install brake disc.

    >465319 REMOVING AND INSTALLING REAR BRAKE DISC 

    Information 

    If new brake discs and/or new brake shoes are installed on the vehicle, they must be worn in before calibration (not PCCB!).

    > WM, 468350 GRINDING DOWN PARKING-BRAKE SHOES (EPB) 

    If a new actuator was installed, it must be confirmed in the Porsche System Tester.

    • >>Control unit overview<<>>Parking brake<<>>Drive links/Tests<<>>Confirm actuator replacement<<.
  2. Adjust and calibrate the parking-brake shoes.

    >468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES 

    Grind down the parking-brake shoes during adjustment and calibration if necessary.

    > WM, 468350 GRINDING DOWN PARKING-BRAKE SHOES (EPB)