Subsequent Work
WARNING: This page is about a different variant/trim than selected.
- Fit wheels
> 440519 Removing and installing wheel - section on "INSTALLING "
- Grind parking-brake shoes (not PCCB!)
- Calibrate the EPB using the Porsche System Tester. To do this, select >>Parking brake<< in the control unit overview. Select >>Maintenance/repairs<< >>Calibration<<.
- To check the function of the EPB, actuate the EPB button several times (press 2-3 times) and make sure that the actuators open and close on both sides.
Position disc brake pads by operating the brake several times.