LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 49 (46 - Brakes - Brake Mechanism (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 4650TW Technical Data/Brake Wear Limits >> Technical Values >> Technical Data - 18-Inch Brake System (V6 (Usa Only)/V8S/V6 Hybrid/V6 Diesel Bin5/V8 Diesel/GTS)

Technical Data - 18-Inch Brake System (V6 (Usa Only)/V8S/V6 Hybrid/V6 Diesel Bin5/V8 Diesel/GTS)

WARNING: This page is about a different variant/trim than selected.
Location Description Type Basic value Tolerance
Operating brake (foot brake) with grey cast iron brake discs (standard brake) with PSM (Porsche Stability Management) as standard Hydraulic dual-circuit brake system with brake-circuit division. Vacuum brake booster, internally ventilated brake discs with six-piston aluminum monobloc fixed-calliper brake at front axle and four-piston aluminum monobloc fixed-calliper brake at rear axle.      
PSM Porsche Stability Management (PSM) as standard with the functions Anti-lock Brake System (ABS), Anti-Slip Regulation (ASR), Engine Drag Torque Control (EDTC), Automatic Brake Differential (ABD), brake force boosting, brake system pre-filling.      
Tandem brake booster Ø (vacuum)     9/10 inches  
Boost ratio     8/7  
Brake master cylinder Ø     28.57 mm  
Brake-circuit division     24/12 mm  
Brake disc Ø, front     360 mm  
Brake disc Ø, rear     330 mm  
Brake disc thickness, front     36 mm  
Brake disc thickness, rear     28 mm  
Thickness tolerance of brake disc, max.     0.01 mm  
Effective brake disc Ø, front     294.4 mm  
Effective brake disc Ø, rear     274.6 mm  
Piston Ø in front brake calliper 6 x 36 mm      
Piston Ø in rear brake calliper 4 x 32 mm      
Brake pad area, front     480 cm2  
Brake pad area, rear     200 cm2  
Total brake pad area     680 cm2