LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 48 (42 - Rear Wheel Suspension Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 429019 Removing And Installing Rear Anti-Roll Bar (PDCC) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Raise the vehicle at the jacking points provided for this purpose.

    > WM, 4X00IN LIFTING THE VEHICLE

  2. Remove the rear right wheel.

    > 440519 Removing and installing wheel - section on "REMOVING "