Tools And Materials: Tools
WARNING: This page is about a different variant/trim than selected.
| Item | Designation | Source | Explanation |
|---|---|---|---|
| A | > Nr.68 - Circlip pliers | See Workshop Equipment Manual, Chapter 2.4 | For loosening and fastening circlips. |
| B | > V.A.G 1275A - Hose clip pliers See Workshop | Equipment Manual, Chapter 2.4 | For securing clamps and hose clamps. |
| C | Hydraulic press | Commercially available hydraulic press. For pressing in the joints. Do not exceed the maximum force required for pressing in the joints (20 kilonewtons/2 tonnes)! |