Technical Values
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Item 2 Threaded connection securing spring-strut mount to piston rod | M12 x 1.5 thread | Tightening torque | 60 Nm (44 ftlb.) | +/- 5 Nm (3.5 ftlb.) | |
| Item 2 Threaded connection securing spring-strut mount to piston rod (PASM damper) | M12 x 1.5 thread | Tightening torque | 70 Nm (52 ftlb.) | +/- 5 Nm (3.5 ftlb.) |