LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2012 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (40 - Wheel Suspension Front Drive Shaft (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 408519 Removing And Installing Front Spring Strut (Steel Springs) >> Preliminary Work >> Removing And Installing Front Spring Strut (Steel Springs)

Removing And Installing Front Spring Strut (Steel Springs)

WARNING: This page is about a different variant/trim than selected.
  1. Remove the relevant side engine compartment trim.

    > 700219 REMOVING AND INSTALLING FRONT TRIM PANEL (ENGINE COMPARTMENT) - section on "Removing"

  2. Before raising the vehicle, loosen the drive shaft mounting at the wheel side. Operate the brake whist doing so (a second mechanic is required).

    > 404119 Removing and installing front drive shaft - section on "REMOVING "

  3. Remove the drive shaft.

    > 404119 Removing and installing front drive shaft - section on "REMOVING "

scientia non olet · About LEMON Manuals